Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Orange, CA
Gate installation in Orange, CA is different from surrounding cities because so much of the work happens on homes built before 1920 or between 1950 and 1975, with very little in between. Old Towne properties often need custom-fit pedestrian gates hung on original brick piers, while the ranch tracts to the north and east need wide driveway swing and slide gates sized for cars, RVs, and occasional trailers. Windsor Gate Repair has served Orange since 2012, and we handle both ends of that spectrum. Call (855) 382-0601 for a free estimate on any gate project.
Why Orange Homes Are Different
Orange sits in a semi-arid Mediterranean climate, and the fall Santa Ana winds are the real test for any gate. Weeks of hot, dry air pull moisture out of redwood and cedar picket gates until stiles warp and paint cracks, while rubber hinges and seals sun-degrade faster than they would nearer the coast. Then the winter rains arrive, wood swells, and gates that were just barely clearing the ground start dragging. We see this cycle every year, and it changes how we set gate clearances and which hinge hardware we recommend in the 92863, 92864, 92865, and 92866 ZIP codes.
Old Towne is its own repair vocabulary. Homes there sit on a mile-square grid of early-1900s Craftsman and Victorian lots, tight enough that many gates hang directly on original masonry property-line piers. Decades of dry-season soil shrinkage settle those piers out of plumb, so a gate that looks like it needs a hinge adjustment often needs the pier itself re-leveled. A technician who only knows tract-home installations will miss that. The north and east sides of the city are different again: 1950s through 1970s single-story ranch tracts with wide driveways built for swing and slide vehicle gates, most of them retrofitted with automation added years after the original gate went in.
Styles & brands we work with





Our Main Orange Services
Most Orange homeowners call us for one of two reasons: a gate that will not open or close properly, or an electric gate that stopped responding to the opener. Both are covered below.
Gate Repair in Orange
Gate repair in Orange spans everything from a sagging wood picket gate in Old Towne to a heavy steel driveway gate off a 1960s ranch tract that has pulled its post out of alignment. The most common calls involve worn cast-iron hinges, rotted posts, gate leaves that drag, and latch hardware that no longer lines up. On older properties, we check the pier before assuming the gate is the problem, because a settled masonry pier will defeat any hinge adjustment. Get the full breakdown on Gate Repair in Orange.

Electric Gate Repair in Orange
Electric gate repair in Orange usually means diagnosing an opener that runs but does not move the gate, a keypad or remote that stopped working, or safety sensors that keep reversing the gate for no visible reason. Santa Ana season brings its own failure mode: dust and fine grit work into arm linkages and limit switches on exposed slide gate operators. We work on LiftMaster, FAAC, BFT, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. See Electric Gate Repair in Orange for service specifics.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Orange
Gate installation in Orange means matching new hardware to two very different housing eras. In Old Towne, that is often a custom-width wood or wrought-iron pedestrian gate on original brick piers, built to look like it belongs to a 1915 house while swinging square and latching cleanly. On the 1950s through 1970s ranch tracts to the north and east, it is more often a full driveway gate, sometimes automated, sized for a wide approach and built to survive Santa Ana wind loading without sagging. Either way, the gate gets quoted and agreed before any work starts. Learn what a full project involves on our Gate Installation page.
Automatic Gate Installation
Signs you need it
You already have a solid gate but want remote openers for cars coming and going without leaving the driver’s seat.
What it costs in Orange
Automatic gate installation in Orange typically runs $2,500 to $9,000 for the opener, arms, safety edges, and control wiring on a workable existing gate.
How we do it
We mount the operator, run power to the gate, install safety edges and receivers, then set limit and force adjustments to the gate’s exact weight and travel.
Driveway Gate Installation
Signs you need it
Your driveway opening is wide enough to need a vehicle gate but currently has nothing, or the old gate is past reasonable repair.
What it costs in Orange
A full driveway gate installation in Orange, including the gate, posts, and hardware, typically falls between $3,000 and $12,000, with automation adding $2,500 to $9,000 on top.
How we do it
We check the opening, soil, and slope, then set posts at the right depth for the gate’s swing or slide, hang and set the gate, and add automation only if you want it.
What Gate Installation Costs in Orange
| Item | Typical range in Orange |
|---|---|
| Pedestrian gate, wood or metal | $1,000 – $4,000 |
| Driveway gate, manual swing or slide | $3,000 – $12,000 |
| Automation added to a gate | $2,500 – $9,000 |
Prices in Orange move most on pier and post condition. In Old Towne, a gate hung on a settled brick pier may need masonry work before any new gate can go up, which adds labor but prevents a new gate from sagging within a year. Every quote is agreed before work starts, so the number we give is the number you pay.
Do I need a permit for gate installation in Orange?
Most single-family gate replacements do not need a permit, but anything that changes the property-line pier or adds new electrical to a driveway gate can trigger review. We check the specific situation before quoting.
Can you match an Old Towne gate to the original style?
Yes. For Old Towne homes we size wood picket and wrought-iron gates to the original opening and use hardware that matches the era, so the new gate does not look like a tract-home transplant.
Brands We Service in Orange
We are brand-fluent across the systems Orange homes actually have installed: FAAC and BFT on higher-end residential and commercial gates, Linear openers on many 1990s and 2000s ranch tract retrofits, and Viking on slide gates for small commercial lots. Because we diagnose the existing system rather than pushing a replacement, we can usually source the right board, arm, or receiver without a full opener swap. See our brands for the full range.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Orange, CA
| Service | Typical range in Orange |
|---|---|
| Hinge adjustment or replacement | $150 – $400 |
| Gate alignment and sag repair | $200 – $600 |
| Post reset in concrete | $400 – $1,200 |
| Wood picket gate replacement | $1,000 – $4,000 |
| Driveway gate installation, manual | $3,000 – $12,000 |
| Circuit board replacement | $300 – $800 |
| Electric opener arm or ram replacement | $400 – $1,200 |
| Sensor or photo eye replacement | $150 – $400 |
| Automatic gate installation, complete | $2,500 – $9,000 |
| Full automation retrofit on existing gate | $2,500 – $9,000 |
In Orange, the two things that push price up are pier condition and opener brand. Old Towne gates on settled masonry piers cost more because the pier itself often needs work before the gate can be hung straight, and commercial-grade Viking or FAAC operators carry higher part prices than entry-level residential openers. Every job is quoted and agreed upfront, so there is no surprise on the invoice.
Neighborhoods We Serve in Orange
We work across Orange, from the Old Towne historic district to the ranch tracts on the north and east sides and the smaller commercial properties sprinkled along the main corridors. Response time across the city is typically same-day or next-day for repair calls, depending on when you get through to us.
- Old Towne Orange
- Orange Hills
- El Modena
- Santiago Hills
- Serrano Heights
Service Area – Cities Near Orange
Windsor Gate Repair also covers the communities directly around Orange. If you are in Villa Park, CA, North Tustin, CA, Tustin, CA, or Anaheim, CA, the same specialists handle your gate work. Call (855) 382-0601 from any of these areas and we will route the right technician to you.
Serving Orange, CA — Our Local Coverage Area
We’re based in the Orange area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Orange
Most repair calls in Orange are handled same-day or next-day. If you call (855) 382-0601 in the morning, we can usually have a technician at your property that afternoon, depending on the schedule.
Some do, especially in the newer hillside subdivisions. If your HOA has a style guide, we can work from it so your replacement gate stays compliant without slowing the job down. Bring the relevant page to the estimate.
Yes. Small commercial lots and HOA entrances in Orange with Viking or FAAC slide gate operators are part of our regular schedule, including safety edge and loop detector work. Quotes are free, so call (855) 382-0601 and describe what is on the property.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Orange Customers Say
"Repair is holding. He was quite a bit later than the window I was given, and the office didn't call me about it, I had to call them. The work itself was done well once he got here."
— Ramon Herrera"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
— Shannon Whitaker"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Andres Castillo