Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Orange, CA | Windsor Gate Repair
We provide independent Ghost Controls gate opener repair across Orange, and the one thing that sets our work here apart is simple: we know Old Towne. The mile-square grid of pre-1920 homes means most Ghost Controls systems here are mounted to original brick and stucco piers that have settled over decades. That changes how we diagnose everything. Whether you’re on East Chapman Avenue or up in the 92867 ZIP, call (855) 382-0601 and we’ll send a technician who actually understands Ghost Controls equipment and Orange’s older housing stock.
Why Orange Residents Choose Us for Ghost Controls Service
We work on Ghost Controls systems every week across Orange, from the Craftsman bungalows north of Chapman Avenue to the ranch tracts east of the 55. Our Ghost Controls sales & service work isn’t a side offering bolted onto a fence company. Gates are all we do, and Ghost Controls is a brand we know cold: the SST and LST swing series, the Dual series, the SLD slide openers, the solar-ready battery backups, the keypads and the receivers. Noel Carrasco started working on gates out of the Inland Empire nearly two decades ago, and he’s pulled apart enough Ghost Controls control boards to know which failures are electrical, which are mechanical, and which are the gate itself telling you something. We’re an independent service provider, not authorized or endorsed by Ghost Controls, which means we repair rather than push replacements. If the board can be fixed, we fix it. If the arm is binding because the gate has sagged, we say so.
Styles & brands we work with





Common Ghost Controls Gate Repair Problems We Solve in Orange
- Control board corrosion on pier-mounted openers. In Old Towne, many Ghost Controls enclosures are bolted to original masonry piers where winter rains wick moisture straight into the housing. We see corroded terminals and failed limit switches on those units far more than on openers mounted to newer stucco columns elsewhere in the city.
- Battery backup and solar charge controller failures after Santa Ana seasons. Orange’s fall Santa Ana events pull temperatures up fast and hold them there. Sealed lead-acid batteries inside Ghost Controls backup kits dry out and crack in that heat, and the charge controllers can fail trying to keep up. We test the whole charging circuit, not just the battery.
- Arm and hinge binding on vintage gates. Original cast-iron hinges on Old Towne wrought-iron gates wear oval after years of use. The Ghost Controls arm then over-torques on every cycle, which strips internal gears. Replacing the opener without addressing the hinges means the new arm fails the same way.
- Remote and keypad signal loss near metal pickets and stucco-over-brick piers. RF doesn’t pass through metal picket gates or dense stucco-over-brick construction well. We relocate receivers, add antenna extensions, or wire in an intercom where the signal simply can’t get through.
- Limit switch drift after dry-season soil shrinkage. When Orange’s soil contracts during long dry spells, piers shift. The gate’s travel path changes slightly, and the Ghost Controls limit settings no longer match reality. The opener stalls or reverses because it thinks the gate has hit an obstruction. We reset limits and re-level the gate, not just the opener.
Ghost Controls Service in Orange: What Local Conditions Mean for Your Equipment
Here’s what we see in Orange that we don’t see the same way in Villa Park or Anaheim Hills. Old Towne’s lots were platted tight, which means pedestrian gates and driveway gates are often hung on original property-line piers that have settled out of plumb over 80 or 100 years. The soil here shrinks in the long dry season and swells when winter rain finally arrives. Over decades, that cycle inches a brick pier sideways. A Ghost Controls opener mounted to that pier will test fine on a bench. In the field, the arm binds because the pier is no longer square to the gate’s swing path. The motor draws too much current. The control board’s overload sensor trips. The homeowner thinks the opener is dead. It isn’t. The pier needs re-leveling, the hinges need replacing, and then the Ghost Controls unit can be reset and tuned to the corrected geometry. A generic gate company that treats every job like a suburban tract home will miss this entirely.
We recently serviced a Ghost Controls Heavy-Duty Single Swing opener on a weathered redwood picket gate off East Chapman Avenue in Old Towne. The homeowner reported the arm stalling halfway open. Our tech found the original brick pier had settled nearly an inch out of plumb, causing the arm to bind and trip the control board’s overload sensor. We re-leveled the pier, replaced the worn cast-iron hinges, and reset the Ghost Controls limit switches. The gate has run smoothly through two Santa Ana wind seasons since.
Ghost Controls Models & Products We Service in Orange
We service the full Ghost Controls residential lineup in Orange: the Heavy-Duty Single Swing (SST) series, the Light-Duty Single Swing (LST) series, the Dual Swing series, and the Slide (SLD) series. That covers everything from a compact LST opener on a pedestrian gate in Old Towne to an SLD slide opener on a wide driveway in a 1960s ranch tract. For parts, we stock genuine Ghost Controls control boards, arms, and battery harnesses for direct-fit reliability. Where aftermarket components genuinely outperform OEM accessories, we use them instead: hinges, keypads, and intercom modules are often better sourced outside the Ghost Controls catalog. We repair boards and replace arms when the gate structure is sound. We recommend a full opener replacement only when the chassis is cracked or the board is obsolete and no longer supported.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Orange
Ghost Controls repair pricing in Orange runs between $150 and $500 for most jobs. A simple limit switch adjustment or remote programming sits at the lower end. Replacing a control board or a swing arm lands in the middle. A full opener replacement, including new arms and a battery backup, runs $800 to $1,800 depending on the model and gate configuration. Our diagnostic service call is $79, and that fee is credited toward any repair we complete the same day. Every price is quoted and agreed before any work starts. Call (855) 382-0601 for an exact quote and a free estimate, no obligation.
Serving Orange, CA — Our Local Coverage Area
We’re based in the Orange area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Orange
Fall is when the exposed wood on your gate has spent a full summer drying out under Orange’s semi-arid sun, so the gate itself warps and shifts. The Ghost Controls opener senses the added resistance and stalls. We check the gate’s plumb and the pier’s alignment before touching the opener’s settings. Call (855) 382-0601 and we’ll sort it out fast.
Yes, if the gate’s track and rollers are sound. The real issue is that Old Towne wrought-iron gates were never designed for slide automation, so the gate’s weight distribution and hinge wear have to be corrected first. We install Ghost Controls SLD openers where the gate can be made to travel properly, and we’ll tell you honestly if the gate itself needs rebuilding before that’s possible.
Stucco-over-brick construction blocks RF signals. Your keypad’s signal can’t reliably reach the receiver if the wall sits between you and the opener. We relocate the receiver, add an external antenna, or run a wired keypad or intercom path. It’s a common Orange condition, not a failing Ghost Controls product.
In Orange’s climate, expect two to four years from a sealed lead-acid backup battery. Santa Ana heat events accelerate battery aging. We test the entire charging circuit during every service call so you know whether it’s the battery, the charger, or the solar panel that’s failing. Call (855) 382-0601 for a free estimate on a battery check or replacement.
Not automatically. If the rest of the opener is sound, we replace just the control board with a genuine Ghost Controls unit and reprogram it. We recommend a full replacement only when the chassis is cracked or the board is obsolete and no longer supported. We’d rather repair your existing system than sell you a new one.
Service Areas Near Orange
We’re based nearby and serve Orange and the surrounding communities, including Orange service area coverage for the full 92865, 92866, 92867, and 92868 ZIP codes. You’ll also find us working in Corona, Norco, and Eastvale. For Ghost Controls owners farther out, see our Ghost Controls service in Claremont and Ghost Controls service in Grand Terrace pages.
Book Your Ghost Controls Service in Orange Today
Your gate should open when you want it to and stay closed when you don’t, everything else is just getting there. Call (855) 382-0601 and we’ll get a technician to your Orange property, diagnose the Ghost Controls system, and give you a written quote before any work begins. Estimates are free.
Written by Noel Carrasco, Owner at Windsor Gate Repair, serving Orange since he first started working on gates across Southern California.