Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Pedley, CA
Most gate work in Pedley starts with the installation, because the gates here were rarely bought off a rack. These are large-lot, half-acre-plus properties along Van Buren Boulevard with custom wrought iron driveway gates, ranch-style tube gates on horse properties, and chain link enclosures built by local fabricators or a previous owner. That means gate installation in Pedley is usually a measured, welded, and field-fitted job, not a swap of a boxed gate from a home center. We handle everything from a new automatic driveway gate to a simple corral gate, and we quote the full price before any work starts. Call (855) 382-0601 for a free estimate.
Why Pedley Homes Are Different
Pedley is unincorporated Riverside County, and the housing stock shows it. Properties along Van Buren Boulevard and the side streets off it run to older single-family homes and manufactured setups on generous lots, many with horse corrals, long rural driveways, and secondary vehicle gates. The gates themselves are often non-standard widths, hung on improvised posts, and built by whoever owned the place three owners ago. That changes the work in a real way: when we install or repair a gate here, we are typically field-fabricating to fit an opening that was never square to begin with, not bolting a standard panel onto a builder’s pillar.
Then there’s the weather. Inland Riverside County heat bakes powder coat and paint until it chalks and flakes. Santa Ana wind events rack gates on their hinges and slam hardware out of alignment. During the dry season, the soil shrinks and posts shift, which throws latches and hinges out of square. A gate that worked in February can bind by August without anyone touching it. We account for all of that on every Pedley job, whether we’re setting new posts in concrete or re-hanging a gate that the dry ground moved.
Styles & brands we work with





Our Main Pedley Services
Homeowners in Pedley call us for two things more than anything else: a gate that stopped working, or an electric system that stopped opening. Both are covered under one roof, and each has its own dedicated page for this area.
Gate Repair in Pedley
A sagging iron gate, a sprung hinge, a latch that won’t catch because the post leaned a half inch – these are the calls we get from Pedley week after week. The dry soil and Santa Ana winds work on gates here year-round, and most of them were custom-built in the first place, so repair usually means cutting, re-welding, re-squaring, or resetting posts rather than swapping in an off-the-shelf part. Gate Repair in Pedley covers the whole job, from diagnosis to a gate that swings true again.

Electric Gate Repair in Pedley
Automatic driveway gates are common on Pedley’s larger lots, and when they fail, it’s usually a board, a limit switch, a receiver, or a power issue – not the gate itself. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we diagnose the system already on the property instead of pushing a replacement. Electric Gate Repair in Pedley goes into the full scope, from safety edges to loop detectors to operator rebuilds.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Pedley
Gate installation in Pedley starts with the site, not the catalog. Most openings here were cut for a gate someone welded thirty years ago, and the posts were set to match that gate, so a new installation often begins with measuring the true opening, checking the post condition, and deciding whether to reuse, reinforce, or reset what’s already in the ground. The heat and Santa Ana wind are part of the spec too – we size hinges, posts, and operators for a gate that lives outdoors in Riverside County sun and wind, not a shaded suburban cul-de-sac. If you’re planning a new gate or replacing one that’s past saving, see our full Gate Installation service for more detail, or call us for a free measure and written price.
Automatic Gate Installation
Signs you need it
You have a heavy custom gate on a long Pedley driveway and you’re done getting out of the truck to open it every time.
What it costs in Pedley
Automatic gate installation in Pedley typically runs $2,800 to $8,500 depending on gate weight, operator type, and the power run distance.
How we do it
We measure the gate and opening, spec an operator matched to the gate’s weight and cycle frequency, set or reinforce the posts, run power and control wiring, mount the operator, install safety edges and receiver, and test the full cycle under load.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rotted, racked beyond repair, or the posts have shifted so far that re-hanging it means hanging it crooked.
What it costs in Pedley
A new driveway gate in Pedley, including posts and hardware, typically runs $1,500 to $6,000 depending on material, width, and whether it’s a single or double swing.
How we do it
We pull dimensions from the actual opening, fabricate or order the gate to those dimensions, set new posts in concrete below the dry-season soil movement line, hang the gate, and adjust hinges and latch so it closes square on day one.
What Gate Installation Costs in Pedley
| Item | Typical range in Pedley |
|---|---|
| Manual single-swing gate, steel or tube | $1,500 – $3,500 |
| Automatic gate operator and controls | $1,700 – $4,500 |
| New gate posts set in concrete | $600 – $1,800 per pair |
Does a Pedley gate installation include the power run and safety edges?
Yes. On automatic gate jobs we run the low-voltage and line-voltage power, install photo eyes and safety edges per UL 325, and test the full system before we leave. It’s included in the quote, not added later.
How long does a custom gate take to install in Pedley?
Most custom gate installations in Pedley take one to two days on site after the gate is fabricated. Fabrication lead time is usually one to three weeks depending on material and finish. You’ll get a written schedule with your quote.
Brands We Service in Pedley
We carry control boards, receivers, edge transmitters, and common hardware for LiftMaster, FAAC, BFT, and Linear, among others. That means most Pedley electric gate repairs don’t wait on a parts order. See our brands for the full lineup.
Pricing for Gate Company in Pedley, CA
| Service | Typical range in Pedley |
|---|---|
| Gate repair diagnostic and minor fix | $150 – $400 |
| Hinge or latch replacement | $180 – $450 |
| Post reset or re-concrete | $400 – $1,200 |
| Weld repair, cracked or broken frame | $250 – $800 |
| Manual single-swing gate, steel or tube | $1,500 – $3,500 |
| Automatic gate operator and controls | $1,700 – $4,500 |
| Full automatic gate installation | $2,800 – $8,500 |
| Electric gate diagnostic | $150 – $350 |
| Operator motor or control board | $400 – $1,600 |
| Safety edge or photo eye replacement | $250 – $600 |
Costs push toward the high end in Pedley when the gate is a custom-width iron gate that needs field welding, when the posts have shifted and need to be reset before the gate can be re-hung, or when the operator install requires a long power run from the house to the gate. Whatever the number, you get it in writing before we start, and we don’t begin a job until you’ve approved the quote.
See the difference
Before
After
Before
After
Before
AfterNeighborhoods We Serve in Pedley
We cover all of Pedley, ZIP 92509, including the Van Buren Boulevard corridor and the rural-residential streets off it. That includes horse properties, older single-family parcels, and manufactured home lots. Typical first-call response in Pedley is same day or next morning, depending on our schedule when you call.
- Van Buren Boulevard corridor
- Rural residential parcels north of the 60
- Horse properties and ranchette areas
- Manufactured home communities
- Unincorporated Pedley, ZIP 92509
Service Area – Cities Near Pedley
Windsor Gate Repair works throughout the Jurupa Valley area and wider Riverside County. We handle gate and electric gate jobs in Glen Avon, CA, Sunnyslope, CA, Rubidoux, CA, and Riverside, CA, along with Pedley itself. Same scheduling and upfront pricing apply across the whole area.
Serving Pedley, CA — Our Local Coverage Area
We’re based in the Pedley area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pedley
We schedule same-day or next-morning calls across Pedley, including the Van Buren corridor and surrounding rural streets. Emergency calls get the earliest open slot. Call (855) 382-0601 and we’ll give you a straight arrival window before you hang up.
Pedley is unincorporated Riverside County, so gate work is generally not permit-heavy, but automatic gates must meet UL 325 safety requirements regardless. We handle the compliance side on every electric install and can advise on any county requirements that apply to your specific property.
We serve all of ZIP 92509, from the Van Buren Boulevard corridor out to the ranch properties and manufactured home lots. If you’re unsure whether your address is in our Pedley coverage area, call and we’ll confirm it immediately.
Contact Windsor Gate Repair in Pedley
If your gate is sagging, stuck, or the operator just clicks when you press the remote, call (855) 382-0601. We’ll diagnose the problem, quote the repair before we start, and get your gate working again. Free estimates on every Pedley job.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pedley Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Andres Castillo"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Marisol Salazar"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Kevin Bennett