Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in San Bernardino, CA
Gate installation in San Bernardino follows patterns that installers in Orange County or Los Angeles rarely deal with. The city’s mix of 1950s – 1970s tract homes with original ironwork, plus sprawling newer subdivisions in the north and east, means we regularly replace builder-grade hardware that was never built for 50 mph Santa Ana gusts. Whether you need a manual swing gate rebuilt at a mid-century home off Del Rosa or full automatic gate installation for a Verdemont property, the work has to account for wind load, UV exposure, and the ground’s tendency to shift through dry summers. Call (855) 382-0601 and we’ll walk you through the right system for your street and soil.
Why San Bernardino Homes Are Different
San Bernardino sits at the base of a mountain range that funnels some of the strongest sustained winds in Southern California. When Santa Ana events roll through, gusts regularly hit 40 – 60 mph and slam against every gate panel from 92401 down through 92404. A gate that was slightly out of alignment in August can be bent or sheared off its hinges by October. Coastal cities deal with salt air and rust; we deal with wind fatigue and sand-scoured hardware. The heat is the second factor: summer days above 100°F dry out grease, bake powder coat, and stress weld joints on older wrought-iron gates. Then there’s the housing stock itself. Many 1950s – 1970s homes north of Highland Avenue still have their original chain-link or wrought-iron gates, and those posts were often set in concrete that has since cracked. Newer stucco subdivisions near Cal State San Bernardino tend to have builder-grade slide operators that fail within three to five years. Homeowners here need a gate specialist who understands both the old ironwork and the new electronics.
Styles & brands we work with
Our Main San Bernardino Services
Most San Bernardino homeowners call us for one of two things: a gate that physically won’t move, or an electric system that stopped responding. Both have dedicated pages with local detail.
Gate Repair in San Bernardino
Mechanical gate repair covers the hardware and structure: sagging frames, seized hinges, bent posts, broken latches, and wheels that have ground flat against warped track. In San Bernardino, wind events are the biggest driver of sudden failures. A gate that rubbed against the ground for a month will often shear a hinge weld during the next strong gust. We rebuild existing gates rather than pushing replacements, which matters when you have mid-century ironwork worth saving. Read the full local breakdown at Gate Repair in San Bernardino.
Electric Gate Repair in San Bernardino
Automated gates add control boards, limit switches, safety photocells, and motors to the mechanical equation. In San Bernardino, power fluctuations during windstorms can cook a circuit board, and heat buildup inside a black metal operator housing shortens motor life. We carry parts and diagnostic tools for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so most repairs happen in a single visit. See the full electric repair scope at Electric Gate Repair in San Bernardino.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in San Bernardino
New gate installation in San Bernardino has to start with the right questions: Is this a swing or slide application? What does the wind do at your specific corner of the city? Is the driveway graded in a way that a slide track will survive the rainy season? Homes in 92404 near the foothills face different wind pressure than flat lots in 92401. We install systems from manual driveway gates to full automatic setups with keypads, intercoms, and vehicle sensors, and every quote accounts for local conditions instead of copying a one-size-fits-all package. For a detailed look at what a full installation includes, see our Gate Installation page.
Automatic Gate Installation
Signs you need it
You’re manually dragging a heavy gate across a driveway multiple times a day, or you’ve had a close call with a delivery driver who couldn’t see the gate until it was open.
What it costs in San Bernardino
Automatic gate installation in San Bernardino typically runs $1,550 – $4,200, depending on swing versus slide configuration, operator brand, and whether we’re adding intercom or keypad access.
How we do it
We set or verify the posts, hang the gate with adjustable hinges or build the slide track, mount the operator, run protected low-voltage wiring, then program limits, safety edges, and remotes before testing the full cycle several times.
Sliding Gate Installation
Signs you need it
Your property has a steep driveway approach or a narrow side yard where a swing gate would clip a vehicle or block the street when opening.
What it costs in San Bernardino
Sliding gate installation in San Bernardino typically runs $1,400 – $3,600 for a single-leaf slide on a poured track, with cantilever styles at $2,200 – $4,700 when the driveway can’t accommodate a floor track.
How we do it
We lay out the track line, pour or anchor the base, set the steel frame and pickets, install the sliding hardware and operator, then align the gate so it rolls without binding through the full opening.
What Gate Installation Costs in San Bernardino
| Item | Typical range in San Bernardino |
|---|---|
| Standard driveway gate (manual) | $500 – $1,200 |
| Automatic swing gate system | $1,550 – $4,200 |
| Sliding gate with operator | $1,400 – $3,600 |
How long does gate installation take in San Bernardino?
Most single-driveway installations finish in one to two days once materials are on site. Custom gates or cantilever slides may add a fabrication week, and we confirm the timeline in writing before starting.
Do you handle the electrical run for an automatic gate?
Yes. We run the low-voltage wiring from the control box to the operator and connect keypads, photocells, and intercoms. The price is quoted and agreed before any work starts, so there’s no surprise invoice at the end.
Brands We Service in San Bernardino
We work on LiftMaster, FAAC, BFT, and Linear systems daily, along with five other major gate brands. Common boards, remotes, and safety-edge parts stay stocked in our service vehicles, so most San Bernardino repairs don’t wait on shipping. See our brands for the full list of what we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in San Bernardino, CA
| Service | Typical range in San Bernardino |
|---|---|
| Gate realignment and adjustment | $80 – $200 |
| Gate track wheel replacement | $45 – $150 per wheel |
| Gate lock and latch replacement | $75 – $220 |
| Weld repair (broken hinge, crack) | $85 minimum |
| Warped frame correction (minor) | $150 – $350 |
| Full gate frame straightening (severely bent) | $250 – $750 |
| Operator motor replacement (residential) | $350 – $900 |
| Control board replacement | $200 – $550 |
| Safety photocell replacement | $120 – $250 |
| Keypad or intercom upgrade | $200 – $600 |
In San Bernardino, windstorm damage pushes most repair quotes toward the middle and upper end of these ranges, since bent posts and snapped hinges are structural fixes, not adjustments. We quote the total cost and get your approval before any work starts – no add-ons at the end of the job.
Neighborhoods We Serve in San Bernardino
Our service area covers the full city limits, from older blocks near downtown and the 215 to the newer subdivisions pushing up toward the base of the mountains. Typical response time within San Bernardino is same-day for urgent mechanical failures and next-day for most electric diagnostics.
- Verdemont
- North Park
- Del Rosa
- Arrowhead
- Carousel / Cal State area
Service Area – Cities Near San Bernardino
We also run regular routes through neighboring Inland Empire communities. If your property sits just outside the city line in Muscoy, CA, Loma Linda, CA, Rialto, CA, or Colton, CA, we can usually schedule you on the same route rotation as our San Bernardino calls.
Serving San Bernardino, CA — Our Local Coverage Area
We’re based in the San Bernardino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Bernardino
For a gate stuck open or pinned shut, we respond same-day in most San Bernardino ZIP codes. Electric board failures and motor replacements are usually next-day, since we stock the common parts locally rather than ordering from a distributor. Call (855) 382-0601 and we’ll give you an honest arrival window.
Most single-family driveway gates don’t require a city permit, but some HOAs in newer San Bernardino subdivisions have their own approval process for gate style and height. We can provide the specs your HOA board wants to see before you submit. Always check your CC&Rs first; we’ll handle the technical details.
Wind damage is the most common repair call we get in San Bernardino after a strong Santa Ana event. Bent frames, sheared hinges, and posts pulled out of plumb are all repairable, and we keep extra heavy-duty hinges and touch-up paint on hand for exactly those weeks. The price is quoted and agreed before we start, so you’ll know the full cost upfront.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Bernardino Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Andres Castillo"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Marisol Salazar"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Kevin Bennett