Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in San Bernardino, CA | Windsor Gate Repair
We repair Ghost Controls gate operators throughout San Bernardino, and the work here looks different than it does anywhere else in the Inland Empire. Santa Ana winds funnel hard against the base of the San Bernardino Mountains, which means the gate usually fails before the opener does. We show up, diagnose the actual fault, and fix what needs fixing. Call Windsor Gate Repair at (855) 382-0601 and we’ll get your Ghost Controls system working again.
We’re an independent Ghost Controls sales & service company, not a manufacturer affiliate, and we’ve worked on Ghost Controls slide and swing operators across every San Bernardino ZIP code from 92401 to 92404.
Why San Bernardino Residents Choose Us for Ghost Controls Service
Windsor Gate Repair is run by Noel Carrasco, who grew up off Magnolia Avenue in Corona and has spent the better part of two decades fixing gates across the Inland Empire. He learned motors, wiring, and mechanical systems through the Industrial Technology program at Norco College, and that background matters when a Ghost Controls board is throwing a fault code that has nothing to do with the board itself.
We work on Ghost Controls systems every week. That means we know the Heavy-Duty Single Swing kits, the slide operators, and the solar swing packages well enough to tell you honestly whether the operator is at fault or the gate it’s bolted to. In San Bernardino, the answer is usually the gate. We don’t sell you an opener your hardware can’t support. We fix what’s actually broken and leave the working parts alone. If you need Rialto Ghost Controls service, we cover that area too.
Styles & brands we work with
Common Ghost Controls Gate Repair Problems We Solve in San Bernardino
- Bent swing arms and sheared mounting bolts after Santa Ana wind events. When 40 to 60 mph gusts push a gate past its stop, the Ghost Controls arm bracket takes the brunt. We straighten or replace arms, install heavier mounting hardware, and get the gate cycling cleanly again.
- Operator stalls or reverses before the gate reaches full travel. Builder-grade hinges on mid-century tract homes from the 1950s and 1960s sag under San Bernardino’s UV and heat, so the arm binds at the limit switch. We replace hinges, realign the gate, and often avoid replacing the operator entirely.
- Control board faults after a wind night. The board is frequently fine. What it’s reading is a hinge plate that sheared or a post that shifted. We diagnose the mechanical problem first, then clear the board once the structure is sound.
- UV-cracked solar panels and degraded backup batteries. San Bernardino summers bake control boxes and solar panels. A Ghost Controls operator complaining of a weak motor often has a sun-damaged panel or a battery that won’t hold charge. We swap in genuine Ghost Controls parts and the motor wakes back up.
- Grit-packed V-groove rollers and limit-switch linkages on sliding gates. Fine wind-blown dust works into every moving surface here. The gate drags, the motor strains, and the owner thinks the Ghost Controls slide operator is dying. We clean, lubricate, and replace rollers where the wear is real.
Ghost Controls Service in San Bernardino: What Local Conditions Mean for Your Equipment
San Bernardino sits at the base of the San Bernardino Mountains, which means Santa Ana gusts pour down the foothill neighborhoods with more force than they hit flat valley cities to the west. We see something specific after every major wind event: entire blocks near the mountain base reporting bent gate frames and sheared hinges on the same day. Not scattered failures. Clusters.
After one particularly rough Santa Ana night, a homeowner near the mountains called us about a Ghost Controls swing operator that had quit mid-open on a double driveway gate. The wind had pushed the gate past its stop and torn the hinge plate clean off. The arm was binding hard against the post, and the control board was throwing a fault. The board was fine. We straightened the gate, re-hung it on heavy-duty hinges, re-plumbed the post, realigned the arm, and the Ghost Controls operator cycled clean on the same visit. We also handle Ghost Controls repair in Muscoy for similar wind damage.
A gate should open when you want it to and stay closed when you don’t. Everything else is just getting there. In San Bernardino, that means building for wind the way coastal cities never have to.
Ghost Controls Models & Products We Service in San Bernardino
We service the full Ghost Controls lineup you’re likely to find on San Bernardino driveways: the Heavy-Duty Single Swing kits (AXS and DTP-series swing arm operators), the slide gate operator built for tubular and V-track gates, and the solar and battery-backup swing kits (TSS/DP series with solar panels). Homeowners looking for Ghost Controls service in Loma Linda get the same full coverage.
We stock genuine Ghost Controls arms, control boards, batteries, keypads, and limit switches for fast turnaround. These DIY-grade operators are sensitive to mismatched actuators and aftermarket boards, so we don’t substitute generic parts that alter safety-reverse behavior. When the gate itself is the issue, we repair hinges, posts, and alignment rather than pushing an operator upgrade the hardware can’t support. For Ghost Controls in Colton, we bring the same genuine parts and approach.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in San Bernardino
Ghost Controls repair in San Bernardino typically runs $150 to $450 depending on what actually failed. A replacement arm or hinge realignment sits at the lower end. A new control board, battery pack, or slide-operator motor pushes toward the higher end. We give you the exact price before any work starts, and the quote covers parts and labor together.
What drives cost here is usually wind damage and UV wear, not the opener itself. We inspect the whole system, tell you which part failed and why, and give you a written figure. Call (855) 382-0601 for a free estimate on your Ghost Controls gate repair in San Bernardino.
Serving San Bernardino, CA — Our Local Coverage Area
We’re based in the San Bernardino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in San Bernardino
Probably not. The motor is usually the last thing to fail. We check the gate structure first (hinge plates, posts, stops), then the arm and board. Call (855) 382-0601 and we’ll tell you what actually broke.
The gate has likely sagged or shifted under San Bernardino’s heat and wind. The arm binds at the limit switch, and the operator stalls or reverses. We realign the gate, replace worn hinges, and the operator runs full travel again.
Sometimes. It depends on gate weight, post condition, and wind exposure. We tell you honestly whether the kit is sized right or whether the gate structure needs work first. We’re independent Ghost Controls service providers, so our answer isn’t a sales pitch.
Both. We handle hinge and post repair, gate realignment, and motor repair under one roof. Most San Bernardino Ghost Controls failures start with the gate, so we fix the structure and the operator together.
The board is receiving power and the operator is functional, so the fault is in the receiver or the keypad itself. UV damage to the keypad face is common in San Bernardino. We replace the receiver or keypad with genuine Ghost Controls parts.
Service Areas Near San Bernardino
Windsor Gate Repair serves San Bernardino and the surrounding communities, including San Bernardino service area ZIP codes 92401 through 92404, along with Ghost Controls service in Sedco Hills, Corona, Norco, Eastvale, and Ghost Controls service in Garden Grove. If your gate is down and you’re in the broader Inland Empire, call us.
Book Your Ghost Controls Service in San Bernardino Today
Your Ghost Controls gate needs a technician who understands both the opener and the wind it fights every year. We’re gate specialists, not generalists. Call Windsor Gate Repair at (855) 382-0601 for a free estimate on Ghost Controls repair in San Bernardino.
Written by Noel Carrasco, Owner at Windsor Gate Repair, serving San Bernardino and the Inland Empire.