Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Ontario, CA
Gate installation in Ontario runs $1,850 to $7,500 for most residential jobs, and the final number depends heavily on post condition, gate weight, and whether automation is part of the plan. Windsor Gate Repair has served Ontario since 2012, and most of our installs here replace gates on 1960s-to-1980s tract homes where the original posts have shifted or rusted at the base. If you’re planning a new driveway gate in zip codes 91758, 91761, 91762, or 91764, call home office at (855) 382-0601 for a free measure and a written quote before any work starts.
Why Ontario Homes Are Different
Ontario sits directly in the path of Santa Ana winds that barrel through the Cajon Pass, and that single fact shapes nearly every gate job we do here. Gates in this city need heavier posts, deeper footings, and hardware rated for repeated wind loading, not just casual use. A gate that works fine in, say, a sheltered Mission Viejo cul-de-sac will lean, bind, or tear its hinges within a season or two in Ontario’s wind corridor.
The housing stock tells the rest of the story. South and east Ontario is full of 1960s-to-1980s tract homes with block-wall fences and original metal or wood driveway gates that are now 40 to 60 years old. Those posts were set shallow by today’s standards, and after decades of hot, dry summers followed by winter rain, many have cracked or tilted. In the newer master-planned communities on the north side, HOA standards dictate gate style, color, and sometimes even hardware finish, so replacement work has to match the community’s architectural guidelines. That’s a very Ontario-specific constraint, and it changes which materials and operators we recommend.
We also see a reliable seasonal pattern in Ontario. After the first heavy winter storm, repair calls spike in the older neighborhoods off Euclid Avenue, where original redwood gates absorb rain, swell, and then warp as the dry summer heat pulls the moisture back out. By August, those same gates are often dragging on the ground or latching only if you lift them by hand. Knowing these cycles is what lets us give Ontario homeowners honest advice about whether a gate is worth repairing or better off replaced.
Styles & brands we work with
Our Main Ontario Services
Ontario homeowners and HOA managers call us most often for two things: getting an existing gate working again, and getting an automated gate system diagnosed when the opener quits or behaves erratically. Here’s what each one looks like in this city.
Gate Repair in Ontario
A sagging gate off Euclid Avenue, a latch that won’t catch after the wind shifted a post, a sliding gate that jumps its track off Archibald: these are daily calls for us in Ontario. Repair work here is usually about re-anchoring posts, replacing worn hinges, and correcting alignment, not just patching a symptom. Because Santa Ana winds pressure-test every repair within weeks, we set posts and hardware to hold up under wind load, not just gravity. For the full breakdown of what gate repair covers and what it costs, see Gate Repair in Ontario.
Electric Gate Repair in Ontario
Electric gate failures in Ontario are often electrical in nature: a control board that faulted after a wind-blown gate jammed, a photo eye knocked out of alignment, a motor that burned out fighting a warped gate in summer heat. We diagnose the exact opener on the property, not a generic system, and we carry parts for the brands Ontario homeowners actually have installed. If your gate opener is dead, grinding, or reversing mid-cycle, start with Electric Gate Repair in Ontario.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Gate Installation in Ontario
Gate installation in Ontario usually means replacing a gate that has outlived its posts, and the local conditions here make post work the most important part of the job. Santa Ana winds funneling through the Cajon Pass put real lateral force on every gate in the city, so an Ontario installation has to be anchored deeper and braced better than one built for a gentler climate. The other common trigger is an HOA requirement in north Ontario’s newer communities, where a specific gate style and finish are written into the CC&Rs, and a replacement has to match exactly. We measure, order or fabricate, and install the complete system so you’re not juggling a gate contractor and an electrician separately. That’s the appeal of working with a dedicated gate specialist: from the first measure to the final operator programming, it’s all under one roof. See Gate Installation for the full service breakdown.
Driveway Gate Installation
Signs you need it
The current gate drags, leans, or no longer closes squarely because the posts have moved, or the gate itself is rusted through at the hinge welds.
What it costs in Ontario
A new driveway gate in Ontario typically runs $1,850 to $5,250 installed, depending on width, material, and post work.
How we do it
We remove the old gate, set or replace posts with deeper footings sized for wind load, hang the new gate, and adjust the hardware until it swings and latches cleanly.
Sliding Gate Installation
Signs you need it
The existing sliding gate binds on its track, the rollers are flattened or rusted, or the track itself has shifted out of level.
What it costs in Ontario
Sliding gate installation in Ontario usually falls between $2,200 and $6,800, with the track and footing condition being the main cost driver.
How we do it
We check the existing track and footing, level or replace the track, hang the new gate with properly spaced rollers, and test full travel with the gate loaded.
What Gate Installation Costs in Ontario
| Item | Typical range in Ontario |
|---|---|
| Manual swing gate replacement | $1,850 – $5,250 |
| Sliding gate replacement | $2,200 – $6,800 |
| Operator / automation added at install | $1,150 – $3,600 |
Do I need a permit to replace my driveway gate in Ontario?
Most direct gate replacements in Ontario don’t require a permit when the gate matches the original size and style, and posts stay in the same location. HOA approval is the more common requirement, especially in north Ontario communities with architectural guidelines. We can confirm during the free measure.
How long does a gate installation take in Ontario?
Most Ontario gate installations finish in one to two days. Custom-ordered gates or jobs with significant post and footing work can run longer, and we confirm the timeline on the written quote before you commit. Call (855) 382-0601 to schedule a measure.
Brands We Service in Ontario
Ontario gates run the full range, and so do we. We service FAAC, BFT, Linear, and Viking operators, along with the other major gate brands in the market, and we keep common boards and safety parts stocked for fast turnaround. When you call about an opener problem, you’ll talk to someone who works on your brand regularly. See our brands for the full lineup.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Ontario, CA
| Service | Typical range in Ontario |
|---|---|
| Gate repair (loose posts, sagging/swollen gate) | $125 – $350 |
| Fence gate sagging / severe lean repair | $175 – $450 |
| Rail or post repair | $200 – $500 |
| Driveway gate drags ground / misalignment repair | $75 – $275 |
| Electric gate panel / component repair | $150 – $350 |
| Electric gate opener replacement | $500 – $2,000 |
| Install safety edges (up to 2) | $200 – $450 |
| Gate operator install (labor only) | $550 – $1,500 |
| Driveway gate installation (manual) | $1,850 – $5,250 |
| Sliding gate installation | $2,200 – $6,800 |
| Operator / automation install | $1,150 – $3,600 |
In Ontario, the two things that push a quote toward the top of these ranges are post and footing work, which is common in the older tract neighborhoods, and wind-load reinforcement, which matters everywhere in the Cajon Pass corridor. Every quote is given in writing before work begins, so there are no surprise line items added after the job starts. Call (855) 382-0601 and we’ll give you the number for your specific gate and site.
Neighborhoods We Serve in Ontario
We work throughout Ontario, from the older tract streets south of the 10 to the newer communities north of the 60. The gate systems change from one neighborhood to the next, but the wind is the same everywhere, and we plan every repair and install around it.
- Euclid Avenue corridor and the older neighborhoods east of downtown
- South Ontario tract home areas near the 60
- North Ontario master-planned communities with HOA gate standards
- Ontario Ranch and surrounding newer developments
- Commercial properties along the Airport and warehouse districts
Response time across Ontario is typically next-day for non-emergency repairs, with same-day scheduling available for emergency gate failures when the route allows.
Service Area – Cities Near Ontario
Windsor Gate Repair handles gate work in the surrounding cities as well. When a job takes us just over the city line, the same pricing and the same wind-load approach apply. We regularly serve Montclair, CA, Upland, CA, Chino, CA, and San Antonio Heights, CA. If your property is in one of these areas, call (855) 382-0601 and we’ll confirm coverage.
Serving Ontario, CA — Our Local Coverage Area
We’re based in the Ontario area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Ontario
Most Ontario repair calls are scheduled next day, and emergency gate failures can often be handled same-day depending on the route. A gate that won’t close is a security issue, so we prioritize those calls. Call (855) 382-0601 and we’ll give you a straight answer on timing.
Yes, especially in the newer master-planned communities on the north side of Ontario. Many CC&Rs specify gate style, color, and even hardware finish. We check your HOA’s requirements before ordering materials, so the installed gate matches what the association approved.
Yes. We handle commercial gate systems throughout Ontario, including the warehouse and industrial districts near the airport. Slide gates, barrier arms, and high-cycle operators are all part of our regular workload, and we stock parts for the commercial brands most common in the area.
What happens when you call
- 1A real person answersNo phone trees — talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Ontario Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
— Andres Castillo"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
— Marisol Salazar"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
— Kevin Bennett